Model：CEL-PF300-T10 Xenon lamp light source system
Place of Origin：Beijing
CEL-PF300-T10 xenon lamp light source system is widely used in photolysis of water, photolysis of aquatic hydrogen oxygen production, CO2 reduction, photothermal catalysis, VOCs degradation, photothermal synergy, photochemical catalysis, photoinduced synthesis, photodegradation of pollutants, water pollution treatment, biological light, optical detection, various types of simulated daylight, visible light, ultraviolet light, monochromatic light acceleration experiments and other fields.
CEL-PF300-T10 xenon lamp light source system adopts seven-inch touch color screen; intelligent control system; adopts fiber optic light feedback function to ensure the stable output of light source; can be used with the whole series of reactors and systems of CEL-Jinyuan; modular design, quick connection of accessories; adopts low pressure controllable speed fan to achieve constant heat dissipation and stable light output; realizes the safe work of the lamp box with low pressure; can be simple and fast by itself Safe lamp replacement.
CEL-PF300-T10 xenon lamp light source intelligent system to achieve automatic power on, off, optical power density display, calibration and automatic adjustment, custom switch times and frequency, to achieve digital monitoring, program mode can be based on the requirements of different stages of the experimental time automatically adjust the light intensity at the right time (can fully simulate the changes in daylight throughout the day). Through the expansion module can be used remotely with software or cell phone applet to achieve real-time online monitoring of the light source.
Fiber optic optical feedback achieves stable output of optical power density of xenon lamp light source; using fiber optic to channel the calibrated optical output into Hamamatsu sensor, which can discard the temperature drift of Hamamatsu sensor and achieve stable long-term signal feedback and stable optical output.
Intelligent control system
The working time and working light intensity of the light source can be adjusted automatically according to the demand; the temperature monitoring of the bulb, power supply, sensor and many other places to ensure the stable operation of the light source.
Regular use mode (without opening fiber optic optical feedback); fiber optic optical feedback mode; program intelligent mode; automatic mode, etc.
Optical power density display
Test point with optical power meter calibration (factory calibration display, working distance 15cm), to achieve real-time display of the working optical power density value; K-factor correction function, can be based on the actual measured value of real-time correction of light intensity output.
Luminous spectrum range SpectralOutput(nm)
300nm~2500nm (without ozone)
200nm~2500nm (with ozone)
Working spot diameter
(optional continuous adjustment accessories)
60mm or more
60mm or more
UV Output, <390nm (Watts)
IR Output, >770nm (Watts)
Visible Output, 390-770nm (Lumens)
300W (Lighting voltage 30KV, working voltage 14V)
Working currentCurrent (Amps DC)
21A (10A~22A, 18A recommended)
Total luminous output power
50W (can replace the bulb quickly and safely by itself)
Lamp life Life (Hours)
>1000H Limit 6000H (dusty and humid environment will seriously affect the life)
Light output index
Light stability: <±1%
Temperature control system
Light source system using multi-point temperature monitoring to ensure stable output of light source.Fan speed delay automatically adjusts according to the system temperature to stabilize the light intensity output.
CEL-LMP400 automatic lifting table; CEL-LB70 photochemistry experiment box
CEL-NP2000-2A Intense light power meter
Optional quartz coated filter
Conventional filters: UVIRCut400 (through 400-780nm), UVIRCut420 (through 420-780nm), Cut800 (through 800nm or more), AM1.5G (300-1100nm), AREF (full spectrum reflection, 200-2500nm), VisREF (standard with visible reflector. 350nm-780nm), UVREF (ultraviolet reflective sheet, 200-400nm).
Bandpass filters: QD254, QD275, QD280, QD295, QD300-800, QD313, QD320, QD325, QD330, QD334, QD350, QD355, QD360, QD365, QD370, QD375, QD380, QD400, QD405, QD420, QD435 QD420, QD435, QD450, QD475, QD500, QD520, QD550, QD578, QD600, QD630, QD650, QD670.QD700, QD730, QD765, QD850, QD940
g-C3N4-triggered super synergy between photocatalysis and ozonation attributed to promoted •OH generation
Highlights Lower redox potential of the conduction band of g-C3N4 benefitted electron trapping. (Cl/) g-C3N4 triggered a super synergy between photocatalysis and ozonation. Promoted surface-charge separation and ozone self-decomposition were achiev
Highly Dispersed TiO6 Units in a Layered Double Hydroxide for ACHTUNGTRENUNGWater Splitting
Breaking the waves: A family of photocatalysts for splitting water into hydrogen was prepared by distributing TiO6 units in an MTi-layered double hydroxide matrix (M=Ni, Zn, Mg; see figure) that displays largely enhanced photocatalytic activity with an H2
Black TiO2 nanobelts/g-C3N4 nanosheets Laminated Heterojunctions with Efficient Visible-Light-Driven Photocatalytic Performance
Black TiO2 nanobelts/g-C3N4 nanosheets laminated heterojunctions (b-TiO2/g-C3N4) as visible-light-driven photocatalysts are fabricated through a simple hydrothermal-calcination process and an in-situ solid-state chemical reduction approach, followed by th
Scan and pay attention to us